Connect the Xpress Flex device
- Click the Xpress Flex button
- Ensure that you have downloaded and are running the latest version of the XFConnect software.
Download the latest version of XFConnect
Please note:
- XFConnect software is currently only compatible with Windows 11
- You may need to run the application as an administrator and also keep the tray empty and pushed in when the unit is first connected
- Dipping the right amount of time is important. If testing the same sample, use a fresh sample from the same bottle.
- To avoid an optical error, keep the test strip shuttle empty and pushed in before powering up the unit (including if the computer is restarted).
Take a test
- Load your test strips into the strip clip
- Ensure the strip codes match those shown on the bottom of the container. Click the arrows icon to change to a different code than the one displayed.
- Click Start when you are ready to dip the strips into the water sample, then follow the instructions
- The system will analyse the water and provide a breakdown of your test results.
- Click Process results to use the results from the Xpress Flex in Pooltrackr Lab