How to connect Xpress Flex

Pooltrackr Support

Modified on: Wed, 7 Jun, 2023 at 10:32 AM

Connect the Xpress Flex device

Click the Xpress Flex button
Ensure that you have downloaded and are running the latest version of the XFConnect software.

Please note:

XFConnect software is currently only compatible with Windows 10 and 11
You may need to run the application as an administrator and also keep the tray empty and pushed in when the unit is first connected
Dipping the right amount of time is important. If testing the same sample, use a fresh sample from the same bottle.
To avoid an optical error, keep the test strip shuttle empty and pushed in before powering up the unit (including if the computer is restarted).

Load your test strips into the strip clip
Ensure the strip codes match those shown on the bottom of the container. Click the arrows icon to change to a different code than the one displayed.
Click Start when you are ready to dip the strips into the water sample, then follow the instructions
The system will analyse the water and provide a breakdown of your test results.
Click Process results to use the results from the Xpress Flex in Pooltrackr Lab